以风险防控为导向优化电镀企业环境风险应急管理的研究

以风险防控为导向,建立了针对电镀行业的环境风险因子库,共计26项因子。以东莞某电镀园区为例,结合现场调研、因子分析等工作,筛选出九大重点改善因子。采用统计学方法对因子改善前后的结果进行横向及纵向对比,总结出行业普遍存在的薄弱环节,提出有针对性的预防管理对策。     

Thermodynamic analysis of a novel fossil-fuel–free energy storage system with a trans-critical carbon dioxide cycle and heat pump

This paper presents and analyzes a novel fossil-fuel–free trans-critical energy storage system that uses CO₂ as the working fluid in a closed loop shuttled between two saline aquifers or caverns at different depths: one a low-pressure reservoir and the other a high-pressure reservoir. Thermal energy storage and a heat pump are adopted to eliminate the need for external natural gas for heating the CO₂ entering the energy recovery turbines. We carefully analyze the energy storage and recovery processes to reveal the actual efficiency of the system. We also highlight thermodynamic and sensitivity analyses of the performance of this fossil-fuel–free trans-critical energy storage system based on a steady-state mathematical method. It is found that the fossil-fuel–free trans-critical CO₂ energy storage system has good comprehensive thermodynamic performance. The exergy efficiency, round-trip efficiency, and energy storage efficiency are 67.89%, 66%, and 58.41%, and the energy generated of per unit storage volume is 2.12 kW·h/m³, and the main contribution to exergy destruction is the turbine reheater, from which we can quantify how performance can be improved. Moreover, with a higher energy storage and recovery pressure and lower pressure in the low-pressure reservoir, this novel system shows promising performance.     

TC4合金表面Cu/石墨复合镀层的摩擦磨损行为

采用无氰电镀工艺在TC4合金表面制备了Cu/石墨复合镀层，研究了镀层的组织结构和摩擦磨损行为。结果表明，采用无氰电镀方法能够在TC4合金表面制备出组织致密且与基体结合紧密的Cu/石墨复合镀层，但增加镀层中石墨的含量会降低镀层与基体合金的结合强度，并导致硬度小幅下降。摩擦磨损实验结果表明，Cu/石墨复合镀层具有优良的摩擦磨损防护性能，归因于石墨有效降低了镀层的摩擦系数和磨损率；对镀层磨损形貌、磨损产物和摩擦系数的综合分析结果表明，纯铜镀层的摩擦磨损机制主要为犁削磨损、黏着磨损和剥层磨损，Cu/石墨复合镀层的磨损机制为轻微的削层磨损和疲劳磨损。     

Binder free and high performance of sputtered tungsten nitride thin film electrode for supercapacitor device

Here, we demonstrates the fabrication of binder free and very efficient supercapacitor electrode based on tungsten nitride (W₂N) thin film on stainless steel (SS) substrate using reactive sputtering technique. W₂N thin film as a working electrode exhibits high specific capacitance (163 F g⁻¹ at 0.5 mA cm⁻² in 1 M H₂SO₄) along with excellent cycling stability. The binder free symmetric supercapacitor (W₂N||W₂N) device delivers a high specific capacitance (80 Fg^-1) and long life span (90.46% capacitance retention after 10,000 cycles) along with high energy (12.92 Whkg⁻¹) and power (∼674 kWkg⁻¹ at 9.36 Whkg⁻¹) densities. These observed excellent electrochemical performances of the present W₂N thin film based supercapacitor device, recommend it as a potential candidate for energy storage applications.     

Transient performances of the gas turbine recuperating waste heat through hydrogen rich fuels

Operational rules and control strategies of the chemically recuperated gas turbine (CRGT) in the marine propulsion are investigated in this paper. The Minimization of Gibbs free energy method is used to calculate the diesel-steam reforming reaction which products synthetic hydrogen rich fuels, and a universal model of the chemical regenerator which is easily applied to different application environments is created. The hydrogen production and hydrogen molar fraction are investigated to verify that the CRGT improve the combustion performances under low working conditions. Off-design calculations are performed to derive proper operational rules, and transient calculations are performed to investigate the best control strategies for the systems. The modelling approach of the chemical regenerator can be generally used in the chemically recuperated gas turbine. The elaborate operational rules can greatly improve the thermal efficiencies under every working condition. The system using synchronous control strategies have better regulation speed and operation stability than that using asynchronous control strategies.     

三菱Q系列PLC串口自由通讯方法的探究

多种工业控制场合需要使用智能设备,并以串行通信将数据发送至上位机。三菱Q系列PLC无顺序通信方法仅支持接收“固定长度”与“变长度有固定结尾”两种数据对象,与发送“变长度无固定结尾”数据的智能设备不能妥善匹配。为此设计了一种Q系列PLC串口自由通信方法,该方法采用顺序控制程序实现了“变长度无固定结尾”数据接收、异常数据消除与通信模块故障自恢复,具有破除通信模块设定局限、可自行定义通信协议的特点。经实验其可同时支持多种智能设备,具有良好的适应性和通用性。     

Enhanced electrical and optical properties based on stress reduced graded structure of Al-doped ZnO thin films

Graded structures of aluminum-doped zinc oxide (AZO) multilayered thin film were prepared on quartz glass substrate by sol-gel process, and then sequentially annealed by raped thermal annealing(RTA) and UV laser annealing technologies for transparent conducting oxide (TCO) applications. Different Al mol% (0, 0.17, 0.33,0.5, 0.66, 0.83, 1) doped ZnO graded structures of multilayer thin films were prepared to optimize the lattice parameter to reduce stress, and then the annealing processes were sequentially performed. Introducing graded multilayered thin films, reduced the stress between the layers. The AZO graded structures of multilayer thin films were annealed by RTA followed by a 350 nm nanosecond pulsed UV laser annealing method. The graded structures of multilayered AZO thin films were investigated and analyzed by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), four-point probe, and UV–vis spectrophotometer, respectively. These results show that multilayered graded thin films were well grown with decreased stress, and well crystallized along the c-axis. The optical transmittance of the films is around 94.8% at 400–800 nm wavelength, and the energy band-gap is around 3.27 eV, respectively. The sheet resistance value of 13.2 kΩ/sq shows a 30% improvement.